No-load speed: 5000 - 25500 rpm
Rated input power: 1200 W
Collet chuck bore: 8 mm / 0.315 "
- Dial gauge for fine tuning the moulding/routing depth with 0.1. mm precision
- Three-level stop to preselect up to 3 different moulding/routing depths
- Robust and torsion-resistant 2-column guide for highest precision
- Hardened and ground interchangeable collet chuck for precise concentricity of tools
- Spindle lock for easy router bit change
- Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
- Thumbwheel for Speed Preselection
- Overload protection: protects the motor from overheating
- Aluminium die cast base plate with coating for easy sliding
- Auto-stop carbon brushes to protect the motor
- Precise parallel guide/ripping fence guided in prisms with fine adjustment for precise milling
- Can also be used on the guide track using an intermediate plate (accessory)
- Extraction possibility by means of connecting an all-purpose vacuum cleaner
Characteristics
Maximum stroke height
50 mm / 2 "
No-load speed
5000 - 25500 rpm
Revolutions at rated load
25500 rpm
Collet chuck bore
8 mm / 0.315 "
Weight (without power cable)
3.5 kg / 7.7 lbs
Vibration
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
88 dB(A)
Sound power level (LwA)
99 dB(A)
Uncertainty of measurement K
3 dB(A)