Metabo W 18 LTX 125 Inox KIT

One of product is no longer available. This pack cant be purchased

Pack content

  • Speed and torque configured precisely for stainless steel processing ensuring a cool grinding action with perfect finish
  • Slim design for prolonged comfort when working overhead or in areas with limited space
  • Metabo Quick for tool-free disc change by means of a quick-locking nut
  • Tool-free adjustable guard; twist-proof
  • Battery pack can be swivelled for better access in hard to reach places
  • Overload protection: protects the motor from overheating
  • Electronic soft start for smooth start-up
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Detachable dust protection filter protects motor from coarse particles
  • Ultra-M technology: highest performance, gentle charging and 3 years of warranty on the battery pack.
  • Battery packs with capacity display for checking the charge status

 

Characteristics
 
Battery pack voltage
18 V
 
Grinding wheel Ø
125 mm
 
No-load speed
5000 rpm
 
Spindle thread
M 14
 
Weight (including battery pack)
2.4 kg
 
Vibration
Surface grinding
4.5 m/s²
 
Uncertainty of measurement K
1.5 m/s²
 
Grinding with sandpaper
2.5 m/s²
 
Uncertainty of measurement K
1.5 m/s²
 
Noise emission
Sound pressure level
83 dB(A)
 
Sound power level (LwA)
94 dB(A)
 
Uncertainty of measurement K
3 dB(A)
  • Ultra M technology: Intelligent battery management for long-lasting battery packs with a 3 year guarantee
  • Patented “AIR COOLED“ charging technology
  • Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life.
  • Processor-controlled charge and discharge management
  • Capacity display with almost no self-discharge
  • No memory effect
  • Capacity display with almost no self-discharge
  • Monitored charging with microcontroller
  • Battery diagnosis
  • Charge time approximately 30 minutes at 1.5 Ah
  • "AIR COOLED" function
  • For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
  • Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
  • Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
  • "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
  • "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.

The robust and compact Metabo tool bag

On the inside of the bag there are three bag compartments with hook and loop straps to take two battery packs and one charger.  On the outside there is a spacious pocket with zipper and two other small pockets on the left and right head with hook and loop closure for quick access.  Comfortable side pads and padded shoulder strap.  Three reflective Metabo logos for optimum visibility on the construction site.  Stable, integrated base plate with strips to protect the bag contents

Material: water-repellent and tear-proof 600D polyester

Dimensions (lxwxh): 460 mm x 260 mm x 280 mm