Pack content

  • Powerful, light, cordless circular saw for universal use on construction sites
  • Aluminium base plate can be directly used on guide rails from Metabo and other manufacturers
  • Fast brake stops the saw blade quickly and improves safety
  • Accurately angled bevel cuts down to 50°, with handy snap-in point at 45°
  • 0° position re-adjustable for highest cutting precision
  • Clearly visible cutting indicator for precise sawing after initial cut
  • Handle with non-slip soft-grip surface  for safe guidance
  • Extraction possibility by means of connecting an all-purpose vacuum cleaner
  • Battery packs with capacity display for checking the charge status 
  • Ultra-M technology: highest performance, gentle charging and 3 years of warranty on the battery pack.

 

Characteristics
 
Battery voltage
18 V
 
Swivel range from / to:
‌ 0 / + 50 °
 
Adjustable cutting depth
0 - 57 mm // 0 - 2 1/4 "
 
Maximum cutting depth at 90°
57 mm / 2 1/4 "
 
Maximum cutting depth at 45°
43 mm / 1 11/16 "
 
Saw blade Ø x bore
165 x 20 mm / 6 1/2 x 5/8 "
 
No-load speed
4600 rpm
 
Max. cutting speed
40 m/s / 129 ft/min
 
Weight (including battery pack)
3.4 kg / 7.5 lbs
 
Vibration
 
Sawing chipboards
2.5 m/s²
 
Uncertainty of measurement K
1.5 m/s²
 
Noise emission
 
Sound pressure level
92 dB(A)
 
Sound power level (LwA)
103 dB(A)
 
Uncertainty of measurement K
3 dB(A)
 
  • Monitored charging with microcontroller
  • Battery diagnosis
  • Charge time approximately 30 minutes at 1.5 Ah
  • "AIR COOLED" function
  • For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
  • Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
  • Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
  • "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
  • "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
  • LiHD battery packs for ultimate performance and extremely long application with minimal temperature generation
  • Ultra M technology: Intelligent battery management for long-lasting battery packs with a 3 year guarantee
  • Patented “AIR COOLED“ charging technology
  • Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life.
  • Processor-controlled charge and discharge management
  • Capacity display with almost no self-discharge
  • Capacity display with almost no self-discharge
  • One battery pack for everything. 100% compatibility with all 18 V machines and chargers of the CAS partners: www.cordless-alliance-system.com

 

Characteristics
 
Battery pack voltage
18 V
 
Capacity of battery pack
4 Ah
 
AIR COOLED
 
 

The robust and compact Metabo tool bag

On the inside of the bag there are three bag compartments with hook and loop straps to take two battery packs and one charger.  On the outside there is a spacious pocket with zipper and two other small pockets on the left and right head with hook and loop closure for quick access.  Comfortable side pads and padded shoulder strap.  Three reflective Metabo logos for optimum visibility on the construction site.  Stable, integrated base plate with strips to protect the bag contents

Material: water-repellent and tear-proof 600D polyester

Dimensions (lxwxh): 460 mm x 260 mm x 280 mm