Metabo NP 18 LTX BL5.0 18V Blind Rivet Gun KIT

One of product is no longer available. This pack cant be purchased

Pack content

  • Cordless rivet gun for extremely fast riveting, comparable to compressed air devices
  • 100% compatible with all Metabo 18 Volt battery packs
  • Long service life thanks to brushless motor and robust precision gearbox
  • With holding nozzles for one-hand operation - inserted rivet holds in any position
  • Transparent collecting container for simple emptying of the remaining rivet mandrels
  • Quick change of nozzle for different rivet diameters, via integrated tool
  • Safety in the workplace thanks to robust knuckle guards
  • LED light for optimum illumination when riveting; can be switched off for reflective surfaces
  • Ergonomic design for comfortable working also in corners
  • Robust eyelet for energy-saving work with balancer / spring tension
  • Handy belt hook, can be fixed either on the right or left side
  • Battery packs with capacity display for checking the charge status
  • Ultra-M technology for highest performance, gentle efficient charging, optimum energy utilisation and long service life

 

Characteristics
 
Battery voltage
18 V
 
Rivet Ø all materials
2.4 - 5 mm // 3/32 - 3/16 "
 
Max. rivet Ø in aluminium
6 mm / 1/4 "
 
Placement force
10000 N
 
Weight (including battery pack)
2.2 kg / 4.9 lbs 
 
 
 
  • LiHD battery packs for ultimate performance and extremely long application with minimal temperature generation
  • Ultra M technology: Intelligent battery management for long-lasting battery packs with a 3 year guarantee
  • Patented “AIR COOLED“ charging technology
  • Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life.
  • Processor-controlled charge and discharge management
  • Capacity display with almost no self-discharge
  • Capacity display with almost no self-discharge
  • One battery pack for everything. 100% compatibility with all 18 V machines and chargers of the CAS partners: www.cordless-alliance-system.com

 

Characteristics
 
Battery pack voltage
18 V
 
Capacity of battery pack
4 Ah
 
AIR COOLED
 
 
  • Monitored charging with microcontroller
  • Battery diagnosis
  • Charge time approximately 30 minutes at 1.5 Ah
  • "AIR COOLED" function
  • For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
  • Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
  • Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
  • "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
  • "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.

The robust and compact Metabo tool bag

On the inside of the bag there are three bag compartments with hook and loop straps to take two battery packs and one charger.  On the outside there is a spacious pocket with zipper and two other small pockets on the left and right head with hook and loop closure for quick access.  Comfortable side pads and padded shoulder strap.  Three reflective Metabo logos for optimum visibility on the construction site.  Stable, integrated base plate with strips to protect the bag contents

Material: water-repellent and tear-proof 600D polyester

Dimensions (lxwxh): 460 mm x 260 mm x 280 mm