Pack content

  • Compact cordless impact driver with 1/4" hexagon socket and 200 Nm
  • Unique Metabo brushless motor for quick work progress and highest efficiency for any application
  • Automatic Power Shift (APS) supports working with self-tapping screws: automatic torque reduction after drilling to prevent overtightening.
  • Twelve speed/torque levels for a wide range of applications
  • Integrated work light for illumination of the work area
  • Robust die cast aluminium gear housing for optimum heat dissipation and durability
  • Handy belt hook, can be fixed either on the right or left side
  • Battery packs with capacity display for checking the charge status
  • Ultra-M technology: highest performance, gentle charging and 3 years of warranty on the battery pack.

Characteristics
 
Battery voltage
18 V
 
Max. no-load speed
2900 rpm
 
Maximum impact rate
4000 bpm
 
Maximum torque
200 Nm / 1770 in-lbs
 
Speed/torque levels
12
 
Bit retainer
Hexagon recess 1/4" (6.35 mm)
 
Weight (including battery pack)
1.3 kg / 2.9 lbs kg
 
Noise emission
 
Sound pressure level
94 dB(A)
 
Sound power level (LwA)
105 dB(A)
 
Uncertainty of measurement K
3 dB(A)
 
 

  • LiHD battery packs for ultimate performance and extremely long application with minimal temperature generation
  • Ultra M technology: Intelligent battery management for long-lasting battery packs with a 3 year guarantee
  • Patented “AIR COOLED“ charging technology
  • Permanent Electronic Single Cell Protection (ESCP) when charging, for particularly long life.
  • Processor-controlled charge and discharge management
  • Capacity display with almost no self-discharge
  • Capacity display with almost no self-discharge
  • One battery pack for everything. 100% compatibility with all 18 V machines and chargers of the CAS partners: www.cordless-alliance-system.com

 

Characteristics
 
Battery pack voltage
18 V
 
Capacity of battery pack
4 Ah
 
AIR COOLED
 
 
  • Monitored charging with microcontroller
  • Battery diagnosis
  • Charge time approximately 30 minutes at 1.5 Ah
  • "AIR COOLED" function
  • For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs
  • Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases.
  • Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere.
  • "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.
  • "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.

The robust and compact Metabo tool bag

On the inside of the bag there are three bag compartments with hook and loop straps to take two battery packs and one charger.  On the outside there is a spacious pocket with zipper and two other small pockets on the left and right head with hook and loop closure for quick access.  Comfortable side pads and padded shoulder strap.  Three reflective Metabo logos for optimum visibility on the construction site.  Stable, integrated base plate with strips to protect the bag contents

Material: water-repellent and tear-proof 600D polyester

Dimensions (lxwxh): 460 mm x 260 mm x 280 mm